Ҳамаи категорияҳо
EN

ҳама

Гидравликӣ Polyurea / Pu мошини пошидани

Гидравликӣ Polyurea / Pu мошини пошидани

Шартҳои интиқол:EXW, FCA, FAS, FOB, CFR, CIF, CPT, CIP, DAT, DAP, DDP

пардохт:Пардохти пешпардохт 30% аз ҷониби T / T, тавозуни пеш аз интиқол.

Вақти иҷрошуда:дар давоми 10-35 рӯз пас аз гирифтани пардохт.

Кафолатидар давоми як сол аз санаи B/L.


  • шарҳ
  • параметри
  • пурсиш
  • Маҳсулот мавзӯъ
Horizontal-opposed both way proportioning pump adopt coaxial type design, to avoid the pressure discrepancy because of gravity. All the pump system equipped with pressure overload protection switch for emergency stop.
The main machine heating system adopt independent all-aluminum heater, equipped with 8 pieces of high capacity heating bar for more powerful heating capacity, especially suitable for low temperature work in winter. The temperature controller equipped with display,measuring and over-heat protection device.
Self-cleaning system The solvent tank installed on material A side, with continuous cleaning on measuring pump seal to avoid Isocyanate crystallization on bearing. The machine part life can be lengthen with less abrasion, also easy for maintenance.
Pressure compensation To ensure the stable work pressure, we install the pressure compensation device inside hydraulic pump to get better mixing result.
Hydraulic drive system The hydraulic system equipped with imported motor, pump as key parts. The additional radiator system is equipped to avoid the performance fault because of high oil temperature.

The hydraulic polyurea / pu spraying machine BDF-V is specially designed for polyurea elastomer product, which is widely used for wall, roof, refrigerator, tank body, pipeline protection coat for abrasive surface, waterproof, antiseptic purpose. The machine has accurate measuring, even mixing, portable and high performance advantage, especially suitable for sitework.

Model BDF-V
Max. Flow capacity 2-8kg/min
Mixing ratio 1:1, fixed ratio
Material viscosity range 200-1000CPS (Operation temperature)
Max. System pressure 25MPa
Single material output press Max.26MPa
Hydraulic pressure 8-12MPa (for working)
Material heating capacity 9000W X 2
Hose heating capacity 3200W
Max. Hose length 90M
Electric system 38A x 3 + 16A -380V 3Phase
Driven system Full-hydraulic
Cleaning system Pneumatic cleaning
Андоза 1100х700х1400мм

ПАЙДО дар тамос

Категорияҳои гарм